Samrat Counter Type Double Shaft Auto Feeder This is a wonder machine. It can be used single shaft or double shaft by only placing the V-belt from front to rear. It's a simple and strong machine with all the bearing outside for easy greasing and replacement whenever necessary. Six speed fans ensure 100 % cleaning of crops.
OUTPUT WITH DIFFERENT MODELS in KGs
Models
Wheat
Millet
Mustered
Cumin
Castor
Beans
1.50 Feet
800
1500
350
300
1700
800
2.00 Feet
1100
2200
750
400
2200
1000
2.25 Feet
1300
2700
850
500
2500
1200
2.50 Feet
1500
3000
1100
600
3000
1500
Standard Features of SAMRAT Thresher
SAMRAT Thresher is consistently developed and produced with state-of-the-art technology, superior quality standard and always with the best cost/performance ratio.
SAMRAT is the combination of modern technology and agricultural engineering backed by 32 years of practical experience, expertise and dedication of the people behind it.
SAMRAT is highly reliable & efficient, compact, safe & simple in design; easy to operate, low in maintenance and eco-friendly.
SAMRAT Thresher is one such masterpiece, which requires no accessory except what is provided in it. Just connect the joint with the tractor and the process starts.
Power Drive: The Thresher can be operated by any tractor; minimum requirement is 15 H.P.
Folding Pulley: The folding Pulley system is provided to facilitate the use of any tractor to suit its capacity as per the R.P.M. It can also be replaced according to the requirement of the crop concerned
Belt Tightening Pulley: It is provided to adjust / tighten the belt when it gets loose. Thus the chances of slip can be avoided and the life of the belt is maximized
Folding Sieve Frame: The sieving net is fitted on a folding Frame to facilitate change of net wherever required
Drive Joint: Heavy duty new truck joint is used to drive the thrasher smoothly by the P.T.O. shaft of Tractor
V- Belt: India’s best Fenner V-Belts is used in the Thresher
Bearings: New & heavy duty Bearings of the standard & reputed companies are used
Axle, Tyre: Heavy duty Axle with new Bearings as well as rear Tyres of Tractor are used in the Thresher for smooth & trouble free transportation. The tyres, thus, can also be used as spare wheel for the tractor during off-season
Frame structure: Chassis: 100 x 50 mm strong channels are used. The chassis is durable for years
Frame: 65X8 mm best quality angles are used in the frame
Sheets: Major portion of the machine is made up of 2 mm H.R.C (ESSAR MAKE) sheets are used
Design: The machine design is exclusively for threshing
Special Facility: This machine can also be used for other crops simply by changing the sieve, concave & pulleys, etc. These accessories are extra and available on order
Flywheel: Heavy weight Flywheel is fixed on the main rotor, which facilitates smooth & consistent threshing & maintaining speed without any extra load either on the tractor. This technique helps to get more yields without any waste of load or time
Clean Crops: A special arrangement is attached with the thresher to get your crops absolutely cleaned after it is threshed.
Each & every parts of SAMRAT THRESHERS are manufactured in its own factory equipped with up- to- date computerized machinery & under strict vigil of the quality conscious management & skilled personnel.
